Predator EditLock™ Hardware
What is a Predator EditLock?
Predator EditLock Hardware is an affordable machine Edit control. Predator EditLocks can be controlled via software or hardware and are easy to install. It includes magnetic mounting and I/O cable. It supports a wide range of machines. Input voltage levels can vary per digital input, but should match the machine. Choose from the following base voltage configurations:
- 5 Volt DC
- 12 Volt DC
- 24 Volt DC
Why use Predator EditLock?
- Lock or unlock Edit Start button via software
- Lock or unlock Edit Start button via digital I/O
- Supports Predator DNC
- Supports Predator MDC
- Supports Predator RCM
- Supports Predator Touch HMI
- Supports Predator BCRs
- Supports Predator MDC Adapters
- Supports Predator Grizzly Cables
- Optionally use existing RS232 cables
- Open Architecture - Not Proprietary
Installation of Predator EditLocks
Experienced electricians or maintenance personnel are responsible for identifying electrical signals for edit, cycle start, machine alarm and other signals as desired. These signals must be labeled and wired to an orange Wago connector that is included with every Predator EditLock. The orange Wago connector establishes a line of demarcation. Customers are responsible for wiring machine signals to the female Wago connector. When Predator Onsite Services are utilized, Predator Field Service personnel are responsible for wiring, operation and installation of the Predator EditLock up to the male orange Wago connector. This line of demarcation establishes a single border of responsibility and addresses any concerns over warranty, installation and operation. Predator EditLocks operate as a separate isolated 24 volt DC based circuit from the CNC machine, robot or CMM.
Predator EditLock Hardware Specifications
| General | |
|---|---|
| Operating System | Embedded |
| Interfaces | 2 Serial Ports |
| Operating Voltage | 24 Volt DC |
| Standard I/O | 8 Digital Inputs and 6 Digital Outputs |
| Operating Temperature | 32 - 131°F or 0 - 55°C |
| Relative Humidity | 5 - 90% Non Condensing |
| Altitude | 0 - 12,000 ft or 0 - 3660 Meters |
| Safety | UL 1950, EN60950, CSA 22.2, No. 950 |
| Emissions/Immunity | EN55011:1998 Class A |
| Expansion | Up to 8 Digital or Analog Modules |
| RoHS Compliant | Yes |
| I/O Expansion Options | |
| Digital Inputs | Up to 64 DC Inputs (5v, 12v, 24v, 48v, 60v, 110v or 230v) |
| Digital Outputs | Up to 64 DC Outputs (24v) |
| Analog Inputs | Up to 32 DC Inputs (0v - 10v) |
| Low Voltage Inputs | Up to 32 DC Inputs (0v - 10v) |
| Power | |
| Circuit Breaker | Yes |
| International Power Supply | Yes (100 - 240 Volt) |
| Power Options | US, POE, 15 AMP Twist Lock, 20 AMP Twist Lock, EU, AU or UK style |
| Input Voltage Range | 85 - 264 Volts AC |
| Output Voltage | 24 Volts DC 0.5 Amps |
Predator EditLock - Part Numbers
| Part # | Description for Domestic Items |
|---|---|
| 60020000 | Predator EditLock - Voltage and Power To Be Determined |
| 60021005 | Predator EditLock - 5 Volt DC with US power |
| 60021012 | Predator EditLock - 12 Volt DC with US power |
| 60021024 | Predator EditLock - 24 Volt DC with US power |
| 60025005 | Predator EditLock - 5 Volt DC with 15A Twist Lock power |
| 60025012 | Predator EditLock - 12 Volt DC with 15A Twist Lock power |
| 60025024 | Predator EditLock - 24 Volt DC with 15A Twist Lock power |
| 60026005 | Predator EditLock - 5 Volt DC with 20A Twist Lock power |
| 60026012 | Predator EditLock - 12 Volt DC with 20A Twist Lock power |
| 60026024 | Predator EditLock - 24 Volt DC with 20A Twist Lock power |
| Part # | Description for Power Over Ethernet Items |
| 60027005 | Predator EditLock - 5 Volt DC with POE |
| 60027012 | Predator EditLock - 12 Volt DC with POE |
| 60027024 | Predator EditLock - 24 Volt DC with POE |
| Part # | Description for International Items |
| 60022005 | Predator EditLock - 5 Volt DC with EU power |
| 60022012 | Predator EditLock - 12 Volt DC with EU power |
| 60022024 | Predator EditLock - 24 Volt DC with EU power |
| 60023005 | Predator EditLock - 5 Volt DC with UK power |
| 60023012 | Predator EditLock - 12 Volt DC with UK power |
| 60023024 | Predator EditLock - 24 Volt DC with UK power |
| 60024005 | Predator EditLock - 5 Volt DC with AU power |
| 60024012 | Predator EditLock - 12 Volt DC with AU power |
| 60024024 | Predator EditLock - 24 Volt DC with AU power |
NOTE: The above units are recommended for serial based implementations with mounting in existing machine cabinets.
Predator Armor Enclosure and Predator EditLock - Part Numbers
| Part # | Description for Domestic Items |
|---|---|
| 80020000 | Predator Armor Enclosure and EditLock - Voltage and Power To Be Determined |
| 80021005 | Predator Armor Enclosure and EditLock - 5 Volt DC with US power |
| 80021012 | Predator Armor Enclosure and EditLock - 12 Volt DC with US power |
| 80021024 | Predator Armor Enclosure and EditLock - 24 Volt DC with US power |
| 80025005 | Predator Armor Enclosure and EditLock - 5 Volt DC with 15A Twist Lock power |
| 80025012 | Predator Armor Enclosure and EditLock - 12 Volt DC with 15A Twist Lock power |
| 80025024 | Predator Armor Enclosure and EditLock - 24 Volt DC with 15A Twist Lock power |
| 80026005 | Predator Armor Enclosure and EditLock - 5 Volt DC with 20A Twist Lock power |
| 80026012 | Predator Armor Enclosure and EditLock - 12 Volt DC with 20A Twist Lock power |
| 80026024 | Predator Armor Enclosure and EditLock - 24 Volt DC with 20A Twist Lock power |
| Part # | Description for Power Over Ethernet Items |
| 80027005 | Predator Armor Enclosure and EditLock - 5 Volt DC with POE |
| 80027012 | Predator Armor Enclosure and EditLock - 12 Volt DC with POE |
| 80027024 | Predator Armor Enclosure and EditLock - 24 Volt DC with POE |
| Part # | Description for International Items |
| 80022005 | Predator Armor Enclosure and EditLock - 5 Volt DC with EU power |
| 80022012 | Predator Armor Enclosure and EditLock - 12 Volt DC with EU power |
| 80022024 | Predator Armor Enclosure and EditLock - 24 Volt DC with EU power |
| 80023005 | Predator Armor Enclosure and EditLock - 5 Volt DC with UK power |
| 80023012 | Predator Armor Enclosure and EditLock - 12 Volt DC with UK power |
| 80023024 | Predator Armor Enclosure and EditLock - 24 Volt DC with UK power |
| 80024005 | Predator Armor Enclosure and EditLock - 5 Volt DC with AU power |
| 80024012 | Predator Armor Enclosure and EditLock - 12 Volt DC with AU power |
| 80024024 | Predator Armor Enclosure and EditLock - 24 Volt DC with AU power |
NOTE: The above units are recommended for serial based implementations.
Predator Armor Enclosure, 2 Port Express/W and EditLock - Part Numbers
| Part # | Description for Domestic Items |
|---|---|
| 83020000 | Predator Armor Enclosure, 2 Port Express/W and EditLock - Voltage and Power To Be Determined |
| 83021005 | Predator Armor Enclosure, 2 Port Express/W and EditLock - 5 Volt DC with US power |
| 83021012 | Predator Armor Enclosure, 2 Port Express/W and EditLock - 12 Volt DC with US power |
| 83021024 | Predator Armor Enclosure, 2 Port Express/W and EditLock - 24 Volt DC with US power |
| 83025005 | Predator Armor Enclosure, 2 Port Express/W and EditLock - 5 Volt DC with 15A Twist Lock power |
| 83025012 | Predator Armor Enclosure, 2 Port Express/W and EditLock - 12 Volt DC with 15A Twist Lock power |
| 83025024 | Predator Armor Enclosure, 2 Port Express/W and EditLock - 24 Volt DC with 15A Twist Lock power |
| 83026005 | Predator Armor Enclosure, 2 Port Express/W and EditLock - 5 Volt DC with 20A Twist Lock power |
| 83026012 | Predator Armor Enclosure, 2 Port Express/W and EditLock - 12 Volt DC with 20A Twist Lock power |
| 83026024 | Predator Armor Enclosure, 2 Port Express/W and EditLock - 24 Volt DC with 20A Twist Lock power |
| Part # | Description for Power Over Ethernet Items |
| 83027005 | Predator Armor Enclosure, 2 Port Express/W and EditLock - 5 Volt DC with POE |
| 83027012 | Predator Armor Enclosure, 2 Port Express/W and EditLock - 12 Volt DC with POE |
| 83027024 | Predator Armor Enclosure, 2 Port Express/W and EditLock - 24 Volt DC with POE |
| Part # | Description for International Items |
| 83022005 | Predator Armor Enclosure, 2 Port Express/W and EditLock - 5 Volt DC with EU power |
| 83022012 | Predator Armor Enclosure, 2 Port Express/W and EditLock - 12 Volt DC with EU power |
| 83022024 | Predator Armor Enclosure, 2 Port Express/W and EditLock - 24 Volt DC with EU power |
| 83023005 | Predator Armor Enclosure, 2 Port Express/W and EditLock - 5 Volt DC with UK power |
| 83023012 | Predator Armor Enclosure, 2 Port Express/W and EditLock - 12 Volt DC with UK power |
| 83023024 | Predator Armor Enclosure, 2 Port Express/W and EditLock - 24 Volt DC with UK power |
| 83024005 | Predator Armor Enclosure, 2 Port Express/W and EditLock - 5 Volt DC with AU power |
| 83024012 | Predator Armor Enclosure, 2 Port Express/W and EditLock - 12 Volt DC with AU power |
| 83024024 | Predator Armor Enclosure, 2 Port Express/W and EditLock - 24 Volt DC with AU power |
NOTE: Predator Express/W style units are recommended for wireless Ethernet based implementations.
Predator Armor Enclosure, DR 2x2 and Predator EditLock - Part Numbers
| Part # | Description for Domestic Items |
|---|---|
| 87020000 | Predator Armor Enclosure, DR 2x2 and EditLock - Voltage and Power To Be Determined |
| 87021005 | Predator Armor Enclosure, DR 2x2 and EditLock - 5 Volt DC with US power |
| 87021012 | Predator Armor Enclosure, DR 2x2 and EditLock - 12 Volt DC with US power |
| 87021024 | Predator Armor Enclosure, DR 2x2 and EditLock - 24 Volt DC with US power |
| 87025005 | Predator Armor Enclosure, DR 2x2 and EditLock - 5 Volt DC with 15A Twist Lock power |
| 87025012 | Predator Armor Enclosure, DR 2x2 and EditLock - 12 Volt DC with 15A Twist Lock power |
| 87025024 | Predator Armor Enclosure, DR 2x2 and EditLock - 24 Volt DC with 15A Twist Lock power |
| 87026005 | Predator Armor Enclosure, DR 2x2 and EditLock - 5 Volt DC with 20A Twist Lock power |
| 87026012 | Predator Armor Enclosure, DR 2x2 and EditLock - 12 Volt DC with 20A Twist Lock power |
| 87026024 | Predator Armor Enclosure, DR 2x2 and EditLock - 24 Volt DC with 20A Twist Lock power |
| Part # | Description for Power Over Ethernet Items |
| 87027005 | Predator Armor Enclosure, DR 2x2 and EditLock - 5 Volt DC with POE |
| 87027012 | Predator Armor Enclosure, DR 2x2 and EditLock - 12 Volt DC with POE |
| 87027024 | Predator Armor Enclosure, DR 2x2 and EditLock - 24 Volt DC with POE |
| Part # | Description for International Items |
| 87022005 | Predator Armor Enclosure, DR 2x2 and EditLock - 5 Volt DC with EU power |
| 87022012 | Predator Armor Enclosure, DR 2x2 and EditLock - 12 Volt DC with EU power |
| 87022024 | Predator Armor Enclosure, DR 2x2 and EditLock - 24 Volt DC with EU power |
| 87023005 | Predator Armor Enclosure, DR 2x2 and EditLock - 5 Volt DC with UK power |
| 87023012 | Predator Armor Enclosure, DR 2x2 and EditLock - 12 Volt DC with UK power |
| 87023024 | Predator Armor Enclosure, DR 2x2 and EditLock - 24 Volt DC with UK power |
| 87024005 | Predator Armor Enclosure, DR 2x2 and EditLock - 5 Volt DC with AU power |
| 87024012 | Predator Armor Enclosure, DR 2x2 and EditLock - 12 Volt DC with AU power |
| 87024024 | Predator Armor Enclosure, DR 2x2 and EditLock - 24 Volt DC with AU power |
NOTE: Predator DR 2x2 style units are recommended for wired Ethernet based implementations.
